Below you will find an unrivaled selection of some of the best Putters in the World. These are from the top manufacturers and are also some of the same putters as used on tour. These have been not only been tested and approved by us, but you will find them in the bags of the top players in the world.
Sold Out $850.00
They are made of 4 different metals including a bronze/stainless Steel alloy, high density tungsten, low density aircraft grade aluminum, as well as 303 stainless steel. The result is a putter with a significantly higher MOI around 25% higher than a normal blade putter. These are designed and built in the USA. This is brand new and never used.
This putter has 3/4 toe hang and 3/4 offset. This beauty was finished off with a Gloss Black Shaft and Lamkin Deep Etch grip. It is currently set to 35". We can bend this to spec so please let us know if you would like it bent otherwise we will assume standard specs, 70* and 3*.
Putter Model: Robertson
Finish: Raw
Neck Style: Plumbers
Offset: 3/4
Toe Hang: 3/4
Sold Out $1,000.00
This gorgeous Olson is made entirely of Soft Carbon Steel. This beauty is loaded and features a black oxide finish, welded plumbers neck, deep milled face, tri sole, and top line. This is brand new and never used.
This putter has 1/2 toe hang and full offset. This beauty was finished off with an extremely tacky Grip Master Leather grip and is currently set to 35". We can bend this to spec so please let us know if you would like it bent otherwise we will assume standard specs, 72* and 4*.
Putter Model: Classic
Finish: Black Oxide
Neck Style: Plumbers Neck
Offset: Full
Toe Hang: 1/2
Sold Out $1,050.00
This gorgeous Olson is made entirely of 303 Stainless Steel. This beauty is loaded and features a satin finish, welded plumbers neck, lightly milled face, tri sole, and is naked with no alignment aid. This is brand new and never used.
This putter has 1/2 toe hang and full offset. This beauty was finished off with an extremely tacky Grip Master Leather grip and is currently set to 35". We can bend this to spec so please let us know if you would like it bent otherwise we will assume standard specs, 72* and 4*.
Putter Model: Classic
Finish: Satin
Neck Style: Welded Plumbers Neck
Offset: Full
Toe Hang: 1/2
Sold Out $3,250.00
This stunning Scotty Cameron 009 features a gorgeous Brushed Black finish with a classic Red and White paint fill and a top line. This is like new, 9.9 out of 10.
This putter has 1/2 toe hang and full offset. This Tour Scotty was finished off with a Circle T Shaft and is currently set to 34" and will come with the Turf Wars headcover pictured and the Baby T Cameron Grip. This putter also includes an A COA (A-048745) We can bend this, no additional. Please let us know if you have any questions.
Putter Model: Circle T 009
COA: A-048745
Finish: Brushed Black
Neck Style: Plumbers
Offset: Full
Toe Hang: 1/2
Sold Out $600.00
This Suave One is a masterpiece in engineering and machining. We have achieved the ability to 100% mill a consistent and perfect flow neck that doesn’t need to be heated and bent to create offset. All of our new models now feature a deeper cut, tour proven fly milled face that was created with feedback from tour players who wanted a slightly softer, yet responsive sound at impact.
The Suave One is ideal for a player who wants to feel some toe flow with their putter and has an arced putting stroke. There are 5 new colorways offered in this model and all are paired with matching skull covers.
At address, the top line on the Suave one is crowned and perfectly blends into the sexy one piece 3/4 offset milled flow neck. Our signature 3D surfaced sole, smooth flange with no step and concave surfaced shoulders to prevent glare spots at address.
The Tour Mist finish is new for 2019 and is created by finishing each putter by hand through two blasting processes. This results in a sheen that is unique to SWAG and shows off the precision mill patterns we are known for without unnecessary glare or shadowing.
The details are very important to us, and make our putters unique. Spending extra time during the machining process allows us to avoid any excessive hand polishing which leads to inconsistent weights and unrepeatable contours.
Sold Out $1,200.00
This gorgeous Olson is made entirely of 303 Stainless Steel. This beauty features a tempered finish with hammered accents throughout. It also features welded plumbers neck, skim milled face, tri sole, and sight bead. This is brand new and never used.
This putter has 3/4 toe hang and full offset. This beauty was finished off with an extremely tacky Grip Master Leather grip and is currently set to 35". We can bend this to spec so please let us know if you would like it bent otherwise we will assume standard specs, 72* and 4*.
Putter Model: Classic
Finish: Tempered with Hammered Accents
Neck Style: Welded Plumbers Neck
Offset: Full
Toe Hang: 3/4
Sold Out $1,100.00
This gorgeous Olson is made entirely of 303 Stainless Steel. This beauty is loaded and features a satin finish, welded plumbers neck, deep milled face, tri sole, and has a topline. This is brand new and never used.
This putter has 3/4 toe hang and full offset. This beauty was finished off with an extremely tacky Grip Master Leather grip and is currently set to 34". We can bend this to spec so please let us know if you would like it bent otherwise we will assume standard specs, 72* and 4*.
Putter Model: Classic
Finish: Satin
Neck Style: Welded Plumbers Neck
Offset: Full
Toe Hang: 3/4
Sold Out $1,100.00
This gorgeous Left Handed Olson is made entirely of Soft Carbon Steel. This beauty is loaded and features a Black Oxide finish, welded plumbers neck, deep milled face, tri sole, and top line. This is brand new and never used.
This putter has 3/4 toe hang and full offset. This beauty was finished off with a matte black shaft, and an extremely tacky Grip Master Leather grip. It is currently set to 34". We can bend this to spec so please let us know if you would like it bent otherwise we will assume standard specs, 72* and 4*.
Putter Model: Left Hand Classic
Finish: Black Oxide, will rust over time
Neck Style: Welded Plumbers Neck
Offset: Full
Toe Hang: 3/4
Sold Out $600.00
The Savage Too Centershaft is the perfect compact mallet for the player looking for a low offset design and a clean classic look at address. It was imperative that this mallet had all the features that we loved about our original Savage Too while still incorporating a new center shafted location. The almost center location allows this Savage Too C to have plenty of toe flow with zero offset. The same deeper face milling along with the heavier 365g head weight was carried over from our original Savage Too in order to create an extremely stable putter that is hard to put down...even for a traditional anser style lover!
The hidden spud neck and wider flat topline help with cleaner lines at alignment, while the the new deeper milling creates the perfect sound and feel at impact. This current revision of the Savage Too was brought about due to requests from Korn Ferry and PGA Tour players to see a compact mallet with a straight shaft and no offset.
Sold Out $600.00
The Handsome One is a classic tour proven design with a Swag spin on it, now refreshed for 2019 with a new sole engraving design and a deeper cut, tour proven fly milled face that was created with feedback from tour players who wanted a slightly softer, yet responsive sound at impact.
At address, the crowned topline seems to melt into the shoulders and by surfacing the shoulders on a large organic curve they in turn make a smooth transition into our bumpers. Spending extra time during the machining process allows us to create a neck with a consistently soft profile unlike any other on the market.
The Tour Mist finish is new for 2019 and is created by finishing each putter by hand through two blasting processes. This results in a sheen that is unique to SWAG and shows off the precision mill patterns we are known for without unnecessary glare or shadowing. There are 5 new colorways offered in this model and all are paired with matching skull covers.
Sold Out $2,850.00
This stunning Scotty Cameron Terrylium Tour Newport (TNP) features 2-20g weights and a flange line. This putter also features a stunning Tour Black finish. This is used for about a season, 8 out of 10, making it the perfect gamer.
This putter has 1/2 toe hang and full offset. This Tour Scotty features a tour black shaft with circle t shaft band. It is currently set to 34" and will come with the T22 Circle T Headcover and Circle T Grip. This putter can be bent to specs, so please put any modification instructions in the notes section during checkout otherwise we assume standard specs.
Putter Model: Circle T Terrylium TNP
Finish: Tour Black
Neck Style: Plumbers
Offset: Full
Toe Hang: 1/2
Sold Out $3,000.00
This newly released Scotty Cameron Circle T Tourtype SSS Special Select putter features a newly redesigned Fastback 5.5 head with a FloJet neck and two 15g Circle T weights. This piece is like new 9 out of 10.
This putter has 1/8 toe hang and 3/4 offset. This Tour Scotty was finished off with a Circle T Shaft and is currently set to 33.5" and will come with a Special Select Circle T Headcover and Circle T Scotty Grip. We can bend this, no additional. Please let us know if you have any questions.
Putter Model: Circle T Special Select F5.5
Finish: Standard
Neck Style: FloJet
Offset: 3/4
Toe Hang: 1/8
$600.00
The Handsome Too is a classic tour proven design with a Swag spin on it, now refreshed for 2019 with new sole engraving design and a deeper cut, tour proven fly milled face that was created with feedback from tour players who wanted a slightly softer, yet responsive sound at impact.
At address, the topline on the Handsome Too is flat and contrasts clearly opposed to the surfaced shoulders. Surfacing the shoulders on a large organic curve gives the appearance of a smooth transition into the topline while the toe and heel are surfaced to create transitions into the toe and heel bumpers. The smooth pocket cavity with no step is a signature feature of all models.
The Handsome Too features a triplane sole and milled drafts to ensure the putter sits square at address. Spending extra time during the machining process allows us to create a neck with a consistently soft profile every time. Every line, every pass of the end mill, and every edge is engineered to look a certain way, to blend edges and create a new standard for what a milled putter should look like.
The Tour Mist finish is new for 2019 and is created by finishing each putter by hand through two blasting processes. This results in a sheen that is unique to SWAG and shows off the precision mill patterns we are known for without unnecessary glare or shadowing. There are 5 new colorways offered in this model and all are paired with matching skull covers.
Our online shop is updated frequently with new, rare, and unique tour clubs all the time. Email us today with any questions about your next custom build.
Email us by clicking the envelope below! Don't forget to sign up for Will's Deals.
Sign up to get the latest on sales, new releases and more …